TY - JOUR ID - 16424 TI - A Three-dimensional Finite Element Analysis of Stress Distribution in Inclined Placed Implants JO - Journal of Dental Materials and Techniques JA - JDMT LA - en SN - 2322-4150 AU - Yurekli, Emel AU - Emre Ozkir, Serhat AD - Research Assistant, Ministry of Health Mamak Oral and Dental Health Center, Ankara, Turkey AD - Associate Professor, Osmangazi University, Faculty of Dentistry, Department of Prosthodontics, Eskişehir, Turkey Y1 - 2020 PY - 2020 VL - 9 IS - 3 SP - 152 EP - 160 KW - Finite element analysis KW - dental implant KW - Fixed Partial Denture, Implant Inclination, Stress analysis DO - 10.22038/jdmt.2020.48218.1367 N2 - Introduction: Short implants are considered as a sole option in many patients due to anatomical limitations. It was aimed to assess the functional load stress at implants, surrounding bone and superstructures with different inclination angle. Methods: Seven finite element models with three implants (4 mm × 8 mm) and a separate model with longer implants (4 mm× 10 mm) with an angulation of 37° were designed. The implants were first placed vertically and then angled in distal direction preserving their parallelism increasing 6 ° at each step. Chromium-Cobalt was used to prepare superstructures. Oblique force of 100 N was applied on superstructures. Result: Inclined implant replacement did not significantly increase stress and compressive forces on bone, and the stress on implant surrounding bone decreased as inclination angle increased. On the other hand, in the model with linger implant more homogenous stress distribution was observed and implant’s von Mises values ​​decreased. Conclusion: Inclination of implants could have no detrimental effects on bone. Furthermore, inclination of implants provides the opportunity of placing longer implants and also more favorable stress distribution around the implants and in bone. UR - https://jdmt.mums.ac.ir/article_16424.html L1 - https://jdmt.mums.ac.ir/article_16424_7b9a35d1f916ec4e044c5b511961b649.pdf ER -