A Technique to Guide and Measure the Reduction of a Processed Mandibular Complete Denture for Resilient Soft Liner
Rachana J
Shah
Department of Prosthodontics, Government Dental College and Hospital, Ahmedabad,
Gujarat, India
author
Sujal G
Shah
Private Practitioner, Ahmedabad, Gujarat, India
author
text
article
2014
eng
A resilient soft liner (RSL) has been used in processed complete dentures but controlling its thickness has always been a challenge because of uneven reduction of the denture’s intaglio surface. Use of a thermoplastic vacuum-formed template and an endodontic K-file, as guides, for the reduction of a processed mandibular complete denture to receive RSL is described in the present report. A processed mandibular complete denture is prepared by reducing its borders and drilling holes in its surface. A thermoplastic sheet adapted to the intaglio surface and an endodontic K-file with rubber stop adjusted to the desired dimension are used as guides to the reduction procedure and allows intermittent measuring of the reduced areas. This technique helps in reducing the processed denture’s intaglio surface in a controlled manner thus maintaining the strength of the denture base and effectiveness of soft liner. It also makes the application of resilient soft liner a cost and time effective maneuver
Journal of Dental Materials and Techniques
Mashhad University of Medical Sciences
2322-4150
3
v.
4
no.
2014
139
143
https://jdmt.mums.ac.ir/article_3343_c5af7d9434b30521713809b0a1a244bf.pdf
dx.doi.org/10.22038/jdmt.2014.3343
Evaluation of the Effect of 2 Flask Investment Materials on Color Stability of 5 Brands of Denture Teeth
Fariborz
Vafaee
Dental Research Center, Department of Prosthodontics, Hamadan University of Medical Science, , Iran
author
Sara
Tavakolizadeh
Department of Prosthodontics, Shahid Beheshti University of Medical Science, Tehran, Iran
author
Mahdi
Kadkhodazadeh
Department of Periodontics, Shahid Beheshti University of Medical Science, Tehran, Iran
author
Masoume
Khoshhal
Department of Periodontics, Hamadan University of Medical Science, Hamadan, Iran
author
text
article
2014
eng
Introduction: The purpose of this study was to investigate the effect of flask investment materials on the color changes of different brands of resin denture teeth. Methods: Resin denture teeth (560) were divided into 2 groups according to the materials used for flask investment (silicone or gypsum). All the specimens were thermocycled between 4°C and 60°C with 60-s dwell times for 1,000 cycles. Subsequently, the specimens of each group were divided into 4 subgroups based on the immersion media: coffee, tea, cola, and distilled water. Digital images of the teeth were taken before immersion and 30 days after immersion. The color samples were measured using the CIE L*a*b* system, and color differences (∆E) were calculated. The data were evaluated by three ways ANOVA and the Tukey HSD test. Results: There was not a significant difference in ∆E using three-way ANOVA, while the results showed considerable statistical differences with two factor ANOVA interaction. The ∆E values in the silicone group were significantly more than those in the gypsum group (P<0.001). Among the solutions in which specimens were kept, maximum discoloration was seen with coffee followed by cola, tea, and distilled water. The Ivoclar Vivadent denture teeth in the silicone group, as well as the Apple teeth in the gypsum group exhibited the highest level of color stability. Conclusion: All test groups exhibited visually perceptible color changes; the denture teeth and flask investment materials, as well as the nutritional habits, significantly affected the color stability of the resin denture teeth.
Journal of Dental Materials and Techniques
Mashhad University of Medical Sciences
2322-4150
3
v.
4
no.
2014
144
150
https://jdmt.mums.ac.ir/article_3344_db81b64021555c69e26db43360ccba0f.pdf
dx.doi.org/10.22038/jdmt.2014.3344
The Relationship between Osseous Changes of the Temporomandibular Joint and RDC/TMD Groups in CBCT Images
Mahrokh
Imanimoghaddam
Oral and Maxillofacial Disease Research Center, Department of Oral and Maxillofacial Radiology, Mashhad University of Medical Sciences, Mashhad, Iran
author
Azam Sadat
Madani
Dental Research Center, Department of Prosthodontics, Faulty of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
Mohammad Reza
Talebzadeh
Private Oral and Maxillofacial Radiologist, Hakim Hospital of Neyshabur, Neyshabur, Iran
author
Ali
Bagherpour
Dental Research Center, Department of Oral and Maxillofacial Radiology, Mashhad University of Medical Sciences, Mashhad, Iran
author
Mona
Alimohammadi
Postgraduate Student of Oral and Maxillofacial Radiology, Mashhad University of Medical Sciences, Mashhad, IranMashhad, Iran
author
text
article
2014
eng
Abstract Introduction: Temporomandibular joint disorders (TMD) are the most common disorders of the jaw, and despite their clinical importance, they are not completely understood. This study was aimed to evaluate the changes of temporomandibular joint (TMJ) on cone beam computed tomography (CBCT) images in disc displacement vs. osteoarthritis of the TMJ. Methods: In this study, 45 patients, including 37 women and 8 men (13-89 years of age), were examined. The patients were selected based on RDC/TMD criteria and group I disorders were excluded from the study. Accordingly, group II consisted of 43 joints with jaw clicking or displaced discs, and group III comprised 46 joints with crepitus. CBCT images in sagittal, coronal, and axial sections were examined to assess osseous changes in terms of flattening, sclerosis, erosion, resorption, and osteophyte formation. Data were analyzed using statistical tests including the chi-square, Mann-Whitney, and Kolmogorov-Smirnov tests with the confidence interval of 95%. Results: Mann-Whitney test for the comparison of mean age between groups II and III was not statistically significant (p value=0.06). A significant differences was found between two (RDC/TMD) groups according to the prevalence of condylar erosion, resorption, and osteophyte (p<0.05). Similar findings were present between articular eminence flattening, erosion, resorption and (RDC/TMD) groups (P-value<0.05). Conclusion: The pattern of bony changes was different in osteoarthritis when compared with in disc displacement. Most of the changes were concentrated in various parts of the condyle and the articular eminence with no particular changes in the mandibular fossa
Journal of Dental Materials and Techniques
Mashhad University of Medical Sciences
2322-4150
3
v.
4
no.
2014
151
157
https://jdmt.mums.ac.ir/article_3345_249334b4d91d15dfd84eaf927149601f.pdf
dx.doi.org/10.22038/jdmt.2014.3345
Bacterial Leakage Assessment for Different Types of Resin-Based Dental Restorations Applied Using Various Placement Methods
Horieh
Moosavi
Dental Materials Research Center, Department of Restorative Dentistry, Faculty of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
Elham
Afshari
Undergraduate student of dentistry, Faculty of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
Maryam
Forghani
Dental Research Center, Department of Endodontics, Faculty of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
Kiarash
Ghazvini
Microbiology and Virology Research Center, Ghaem Hospital, Faculty of Medicine, Mashhad University of Medical Sciences, Mashhad, Iran
author
Fatemeh
Velayati
1 Dental Materials Research Center, Department of Restorative Dentistry, Faculty of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
text
article
2014
eng
Introduction: Although composite resins have improved greatly since their introduction, microleakage is one of the most frequently encountered problems. This study compared the effects of different monomer systems and layering techniques on the bacterial leakage of Cl I composite resin restorations. Methods: Eighty-two sound human third molars were used. The teeth were randomly divided into six groups of 12 teeth each and two positive and negative control groups of five teeth. Class I cavities, measuring 4×4×2 mm, were prepared. The first three groups were filled with a silorane-based composite (Filtek P90) using three different methods of filling (bulk, incremental and snowplow) and the remaining three groups were filled with a methacrylate-based composite (Clearfil AP-X) using the same techniques. The specimens were stored for 24 hours at 37°C and then thermocycled up to 1000 cycles. The bacterial leakage of the specimens was assessed in a microbiological laboratory and statistical analyses of data were performed by Fisher’s exact and chi-squared tests (P<0.05). Results: There were no significant differences between Filtek P90 and Clearfil AP-X (P=1) in terms of microleakage. The difference between the outputs related to three filling techniques was not significant, either (P>0.05). Conclusion: Leakage occurred similarly in both silorane- and methacrylate-based composite resins and three filling techniques.
Journal of Dental Materials and Techniques
Mashhad University of Medical Sciences
2322-4150
3
v.
4
no.
2014
158
165
https://jdmt.mums.ac.ir/article_3346_0090b4e0a2cc01109d10e6cef2f1dda0.pdf
dx.doi.org/10.22038/jdmt.2014.3346
Chemical Preparation of Beta Calcium Sulfate Hemihydrate Granules with a Special Particle Size as Bone Graft Material
Naser
Sargolzaie
Department of Periodontics, Dental Material Research Center, School of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
Javad
Sargolzaie
Department of chemical engineer, Ferdowsi University of Mashhad, Iran
author
Nasrollah
Saghravanian
Oral and Maxillofacial Disease Research Center, Department of Pathology, School of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
text
article
2014
eng
Introduction: Beta calcium sulfate hemihydrate (BCSH), which is commonly known as “Gypsum plaster” has long been used as bone graft material because of its excellent biocompatibility and the ability for bone regeneration. Several methods have been used for the preparation of BCSH, including heat treatment of calcium sulfate dihydrate with water, application of inorganic acids or condensed inorganic salt solutions under high or atmospheric pressure. As a bone graft, it is preferred that the BCSH powder has a granular form for the purpose of manipulation, bio-mechanical properties and ease of injection. Methods: For this study granules of BCSH in the size of 500 to 700 micrometers were manufactured and sterilized using gamma ray. For assessing the regeneration of thismaterial, six rabbits were selected and granules were injected in the bone defects that were made using diamond bur in their skull under general anesthesia. Biopsies for histological evaluations were done 3, 6, 9, 12, 14 and 16 months following surgery. Results: At the third month time-point, remodeling of the BCSH was evident, and complete newly formed bone was seen in the region of the defect. Conclusion: The results of this study demonstrated that BCSH had a good biocompatibility without inducing an inflammatory response and promoted bone healing.
Journal of Dental Materials and Techniques
Mashhad University of Medical Sciences
2322-4150
3
v.
4
no.
2014
166
174
https://jdmt.mums.ac.ir/article_3347_239886ef44794e1d30aebc246677eddc.pdf
dx.doi.org/10.22038/jdmt.2014.3347
Effect of 0.2% Chlorhexidine Gel on Frequency of Dry Socket Following Mandibular Third Molar Surgery: A Double-Blind Clinical Trial Clinical Trial
Baratollah
Shaban
Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
Hamid Reza
Azimi
Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
Hani
Naderi
3 Department of Periodontics, Faculty of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
Anooshe
Janani
4 Department of Pediatrics, Faculty of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
Mohammad Javad
Zarrabi
Department of Periodontics, Faculty of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
AmirHossein
Nejat
General Dentist, Mashhad, Iran
author
text
article
2014
eng
Introduction: Alveolar osteitis (AO) is one of the most common postoperative complications after third molar surgery. Various techniques have been used to reduce the risk of AO. The aim of the current study was to evaluate the effect of Chlorhexidine (CHX) bioadhesive gel in preventing the development of AO. Methods: Patients with bilateral impacted mandibular third molars underwent surgical extraction of both teeth. One socket was randomly received CHX gel and the contralateral socket served as the control. The outcome variable was development of AO and the CHX gel application was the predictor variable. Data were analyzed using chi-square test with the confidence interval of 95%. Results: 41 patients (27 females and 14 males) with mean age of 24.15 ± 5.02 years underwent 82 surgeries. Total of 11 sockets (13.41%) developed AO. The frequency of AO in CHX gel (2 cases, 4.87%) side was significantly lower than control (9 cases, 21.95%) side (P-value < 0.05). No side effects observed following CHX gel application. Conclusion: Application of CHX gel could be an effective approach to reduce the risk of developing AO following mandibular third molar surgery.
Journal of Dental Materials and Techniques
Mashhad University of Medical Sciences
2322-4150
3
v.
4
no.
2014
175
179
https://jdmt.mums.ac.ir/article_3348_0014eed8ddfa520326cebdb21274d1b6.pdf
dx.doi.org/10.22038/jdmt.2014.3348
Dentomaxillofacial Radiographic Changes in a Group of Iranian Patients with End Stage Renal Disease Undergoing Hemodialysis
Zahra
Shakibaei
Department of Oral and Maxillofacial Radiology, Faculty of Dentistry, Birjand University of Medical Sciences, South Khorasan, Iran
author
Elahe
Tohidi
Department of Oral and Maxillofacial Radiology, Faculty of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
Mahmood
Gholyaf
Department of Internal Medicine, Faculty of Internal Medicine, Hamadan University of Medical Sciences, Hamadan, Iran
author
Bahram
Garmrudi
Internal Medicine Specialist, Tamin Ejtemaei Hospital, Birjand University Of Medical Sciences, South Khorasan, Iran
author
Elham
Garmrudi
General Practitioner, Mashhad, Iran
author
text
article
2014
eng
Introduction: This study aims to evaluate the dentomaxillofacial radiographic changes in end stage renal disease (ESRD) patients who were on hemodialysis. Methods: Parathyroid hormone (PTH), calcium, phosphorus and alkaline phosphatase (ALP) measurements, as well as Panoramic and periapical radiographs were obtained from seventy four patients with a history of end stage renal disease (ESRD). Results: 74 patients examined with age range of 15 to 68 years, and a mean age of 41.4±14.6 years. The duration of dialysis ranged between 3 to 156 months with a mean duration of 40.4 months. Thinning or loss of lamina dura was observed in 16 patients (51.4%) and calcification of the pulp in 28 patients (40%). Changes in trabecular pattern was observed in 30 patients (40.6%), alterations in jaw bone density in 29 patients (39.2%) and bilateral calcification of stylohyoid ligaments in 13 patients (17.6%). We did not notice any non periapical origin radiolucent lesion. There was a significant relationship between bone trabecular pattern with P level, age and duration of dialysis. Changes in bone density showed significant relationship with frequency and hours of dialysis per week. Conclusion: No correlation was found between the radiographic changes and Ca level. Although changes in trabecular pattern and density were observed mostly in those who were on hemodialysis for a relatively long time, but we could not establish a definitive relation of radiographic manifestations in ESRD patients with the duration and frequency of dialysis.
Journal of Dental Materials and Techniques
Mashhad University of Medical Sciences
2322-4150
3
v.
4
no.
2014
180
187
https://jdmt.mums.ac.ir/article_3349_c03eccae1d1ce888a2bde5fca1e4a8fd.pdf
dx.doi.org/10.22038/jdmt.2014.3349
An Innovative Rigid Tray Technique as a New Alternative Matrix System for Buildup of Severely Damaged Endodontically Treated Teeth (A Case Report)
Saied Mostafa
Moazzami
Dental Research Center, Department of Operative and Esthetic Dentistry, School of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
Hamideh Sadat
Mohammadipour
Department of Operative and Esthetic Dentistry, School of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
Atefeh
Atoufi
Department of Operative and Esthetic Dentistry, School of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran
author
Michael
Meharry
Department of Restorative Dentistry, Center for Dental Research, Loma Linda University School of Dentistry, Loma Linda, CA, USA
author
text
article
2014
eng
Direct restoration of severely damaged endodontically treated teeth (ETT) using available and conventional and current matrix systems is sometimes impractical and in some clinical cases is impossible. The aim of this paper is to introduce and describe a new matrix system based on Rigid Tray Technique (RTT) for dealing with such difficult clinical cases.
Journal of Dental Materials and Techniques
Mashhad University of Medical Sciences
2322-4150
3
v.
4
no.
2014
188
193
https://jdmt.mums.ac.ir/article_3350_daacb30b0204a831761b94cff9150a59.pdf
dx.doi.org/10.22038/jdmt.2014.3350